Swirl-Free Exterior Detail
Does your vehicle need Buffed, Polished and Waxed? Odds are it probably does and you don't even realize it or you don't know there is anything you can do about it. Well, we're here to tell you there is and you don't have to drive around with your vehicle looking dingy and dull. It doesn't matter if your car is 1 year old or 10 years old, we can make your vehicle look like brand new. Dents and Dings detailing service is second to none. With over 30 years in the auto-body refinish industry, we know all about the clear coats on today’s vehicles. In addition, we know how to properly care for vehicles and the steps it takes to return a vehicle to like new condition. We promote a swirl free finish that you will enjoy for years to come with proper follow-up maintenance of the finish.
Dents and Dings uses nothing but the finest car care products on the market today. And we recommend these products below for any and all post detail maintenance and upkeep.
Buy locally from our friends at:
Zaino Products (www.zainocharlotte.com )
3M Car Care Products (3MCarCare.com )
We have a solid 10-step process to a swirl-free finish:
1: Wash and Dry entire vehicle.
2: Wet sand out any light scratches with 2000 grit sandpaper
3: Mask off all moldings that may come into contact with the high speed buffer so they don't get damaged.
4: Use of a high speed buffer with the correct rubbing compound for the process we have chosen to perform on your vehicle.
5: Wipe down entire vehicle to remove all rubbing compound dust as to not interfere with step 6.
6: Use of a high speed buffer and the correct polish to remove all compound scratches and bring out the new luster of the clear coat.
7: Clean entire vehicle with the use of soft brushes to clean compound and polish out of all cracks and crevices.
8: Hand polish vehicle to highest possible shine with micro-fiber towels for scratch-free finish.
9: Wax entire vehicle with Zaino® Brothers car care products (including moldings) to seal in the shine and to prevent road and air pollutants from re-attacking the finish.
10: Restore all dull plastic moldings and trim